MAXI COBRA RODDING SYSTEM 14mm

End fitting for 4.5mm rod. M5 thread.

End fitting for 6mm rod. M5 thread.

End fitting for 9mm rod. M12 thread.

End fitting for 11mm rod. M12 thread.

End fitting for 14mm rod. M12 thread.

Optional flexi end spring fitting for 9mm, 11mm and 14mm conduit rods with M12 thread. Assists cobra rods around bends and swept tee pieces within ducts. Replaces standard guide tip.

Optional flexi end spring for 4.5mm and 6mm rods. Assists cobra rods around bends and swept tee pieces within ducts. Replaces standard guide tip.

Brass guide tip for Midicobra rodding system. Fits both 4.5mm and 6mm rod, M5 thread.

Guide tip for Medicobra and Maxicobra rodding systems. Fits both 9mm and 11mm rod, M12 thread.

Guide tip for Maxicobra and Maxicobra HC rodding systems. Fits 14mm rod, M12 thread.

Optional roller guide tip.

Optional roller guide tip.

A sonde adaptor that enables the user to attach a sonde with a M12 to M10 female on a cobra rodding system.

Adaptor M5 to 3/4 Universal. Fits 4.5 and 6mm rod.

Adaptor universal 3/4″ to M10. Fits 9 and 11mm rod.

Adaptor M12 to 3/4 Universal. Fits 9 and 11mm rod.

Adaptor M12 female to Lockfast. Fits 9 and 11mm rod.

A flexi sonde adaptor that enables the user to attach a sonde with a M5 to M10 female thread on a cobra rodding system.

A flexi sonde adaptor that enables the user to attach a sonde with a M12 to M10 female thread on a cobra rodding system.

The 33kHz 24mm Duct Sonde is a battery powered transmitter which can be fitted to the end of a Ritelite cobra duct rodding system and used to trace the direction of small and congested ducts or conduit and identify blockage locations.

The 8kHz General Purpose Sonde is a transmitter used to trace the direction of pipes and locate blockages when 33kHZ signal is faint.

The 33kHz 38mm General Purpose Sonde is a transmitter used for pipe traceability and blockage location up to 7M depth from any standard CAT and Genny system.

A 18mm, slim, waterproof powerful 33kHz Sonde transmitter for smaller pipes and ducts for blockage location and pipe traceability.

The Metal Pipe Sonde is a low frequency transmitter that can be fitted to Ritelite cobra rodding systems to enable rods to be traced inside metallic pipes and blockages located.

The cobra rodding repair kit is ideal if your cobra duct rod has snapped, split or kinked in the middle of your reel. The kit is made up of 1 x epoxy glue and 1 x repair splice. Kits are available for 4.5mm, 6mm, 9mm, 11mm and 14mm rod on a next working day delivery service.

A handy spares kit for all 4.5mm Midi Cobra Rodding Systems for fast repair in case of damage.

Keep a spares kit handy for all 6mm Midi Cobra Rodding Systems to enable you to quickly repair your duct rod in case of damage

A handy spares kit for all 9mm Medi Cobra Rodding Systems for fast repair in case of damage.

Quickly mend a broken end fitting on your 11mm Maxi Cobra Rodding System with this handy spares kit

A handy spares kit for the 14mm fibreglass rod of the Maxi and Maxi High Capacity Cobra Duct Rodding Systems to enable fast repair of broken end fittings.

Repair splice for 4.5mm rod.

Repair splice for 6mm rod.

Repair splice for 9mm rod.

Repair splice for 11mm rod.

Repair splice for 14mm rod to extend the product life of the Maxi and Maxi High Capacity Cobra Duct Rodding Systems fitted with 14mm fibreglass rod.

Rapid epoxy glue. 24ml / 28g.

Replacement brake handle for Midicobra frame.

Replacement brake handle for Maxicobra frame. Comes in two parts.

Replacement brake handle for Medicobra frame.

Replacement brake disc, for Maxicobra frame.

An optional stainless steel shackle to fit through the guide tip of the Midicobra.

An optional stainless steel shackle to fit through the guide tip of the Medicobra and Maxicobra.

Replacement split pin for axel on Medicobra and Maxicobra frames.

Replacement wheel for Medicobra and Maxicobra frames.

Rod guiding eye that fits all midi cobra frames with 4.5 or 6mm fibreglass rods. Easy to replace.

Rod Guiding Eye for Maxicobra and Maxicobra HC rodding systems. Fits 14mm rod.

Rod guiding eye complete. For 9mm and larger Cobra frames.

Black ball knob M5. Fits 4.5 and 6mm rod.

Black Ball End M12. Fits 9 and 11mm rod.

Replacement nylon bush. Fits into centre of reel on Midicobra and Medicobra.

Replacement frame for Mini Cobra, complete with reel, for use with 4.5mm rod.

Replacement frame for Midicobra, complete with reel.

Replacement frame for Medicobra, complete with reel.

Often used with Ritelite wheel kits , which are sold separately.

Replacement frame for Maxicobra, complete with reel.

Replacement frame for Maxco High Capacity Cobra, complete with reel, for use with 14mm fibreglass rod.