![Metal Pipe Sonde [sku] CL/YIRS-512](https://cobraductrods.com/wp-content/uploads/2023/06/metal-pipe-sonde.jpg)
Metal Pipe Sonde
The Metal Pipe Sonde is a low frequency transmitter that can be fitted to Ritelite cobra rodding systems to enable rods to be traced inside metallic pipes and blockages located.
£318.00
Price excludes VAT. Delivery calculated at checkout
In stock. Available for immediate delivery.
Price shown applies to orders delivered within mainland UK only.
For larger quantities, international delivery or tailored pricing, add the items you need to your basket and request a quotation.
Spend over £100 on spare parts and receive FREE UK delivery
The Metal Pipe Sonde can be fitted to Ritelite cobra duct rodding systems to enable pipes to be traced and blockages to be located. The specially designed low frequency signal output transmits through the metal pipe walls to the surface and can be detectable at up to 5 metres depth by a CAT and Genny system (depending on pipe material and wall thickness).
| Product | Product Code | Dimensions (mm) øxL |
| Metal Pipe Sonde | CL/YIRS-512 | 39 x 121 |
Key Features:
- Red case to identify as the Low Frequency Sonde
- 512Hz transmit signal allowing detection and tracing by a Precision Pipe and Cable Locator
- Range of up to 5 meters
- M10 threaded stud supplied
- Simple to use
- Robust
- Single AA battery operation
- Fully weatherproof design to IP68
- Compatible with most drain rods
- Resin sealed electronics
You may also like…
-
![Duct Sonde 33kHz [sku] CL/YIRSD-33](https://cobraductrods.com/wp-content/uploads/2023/06/duct-sonde-33khz-300x300.jpg)
Duct Sonde (33KHZ)
£372.65The 33kHz 24mm Duct Sonde is a battery powered transmitter which can be fitted to the end of a Ritelite cobra duct rodding system and used to trace the direction of small and congested ducts or conduit and identify blockage locations.
-
![General Purpose Sonde 8kHz [sku] CL/YIRS-8](https://cobraductrods.com/wp-content/uploads/2023/06/general-purpose-sonde-8khz-300x300.jpg)
General Purpose Sonde (8KHZ)
£314.99The 8kHz General Purpose Sonde is a transmitter used to trace the direction of pipes and locate blockages when 33kHZ signal is faint.
-
General Purpose Sonde (33KHZ)
£240.83The 33kHz 38mm General Purpose Sonde is a transmitter used for pipe traceability and blockage location up to 7M depth from any standard CAT and Genny system.