![General Purpose Sonde 8kHz [sku] CL/YIRS-8](https://cobraductrods.com/wp-content/uploads/2023/06/general-purpose-sonde-8khz.jpg)
General Purpose Sonde (8KHZ)
The 8kHz General Purpose Sonde is a transmitter used to trace the direction of pipes and locate blockages when 33kHZ signal is faint.
£314.99
Price excludes VAT. Delivery calculated at checkout
In stock. Available for immediate delivery.
Price shown applies to orders delivered within mainland UK only.
For larger quantities, international delivery or tailored pricing, add the items you need to your basket and request a quotation.
Spend over £100 on spare parts and receive FREE UK delivery
A 8kHz General Purpose Sonde is a small battery powered transmitter hermetically sealed in a robust torpedo shaped case which which can be screwed onto the end of a drain rod and fed into a pipe. The pipe direction can be then be traced using a CAT and Genny system. The location of a pipe blockage can be identified using this system with enormous cost saving potential.
| Product | Product Code | Dimensions (mm) øxL |
| General Purpose Sonde (33kHz) | CL/YIRS-8 | 38 x 102 |
Key Features:
- Green case to identify the 8kHz version
- 8kHz transmit signal allowing detection and tracing by a Precision Pipe and Cable Locator
- M10 stud
- 5-7 meter range (dependent on Locator)
- Simple to use
- Robust
- Waterproof
- Single AA battery operation
- Fully weatherproof design to IP65
- Adapters available for different Drain Rod Types
You may also like…
-
![Duct Sonde 33kHz [sku] CL/YIRSD-33](https://cobraductrods.com/wp-content/uploads/2023/06/duct-sonde-33khz-300x300.jpg)
Duct Sonde (33KHZ)
£372.65The 33kHz 24mm Duct Sonde is a battery powered transmitter which can be fitted to the end of a Ritelite cobra duct rodding system and used to trace the direction of small and congested ducts or conduit and identify blockage locations.
-
18mm Mini Sonde (33kHz)
£350.00A 18mm, slim, waterproof powerful 33kHz Sonde transmitter for smaller pipes and ducts for blockage location and pipe traceability.
-
![Metal Pipe Sonde [sku] CL/YIRS-512](https://cobraductrods.com/wp-content/uploads/2023/06/metal-pipe-sonde-300x300.jpg)
Metal Pipe Sonde
£318.00The Metal Pipe Sonde is a low frequency transmitter that can be fitted to Ritelite cobra rodding systems to enable rods to be traced inside metallic pipes and blockages located.