Battery-Operated Sonde Transmitters
Sondes are self-contained battery-operated transmitters that can be fitted to all Ritelite cobra rodding systems with the correct sonde adaptor. Sondes are miniature signal generators for finding the position of blockages by tracing the paths of pipes, drains, ducts and sewers. The range is system tuned for optimum performance with industry standard Cat and Genny systems.
-
![Duct Sonde 33kHz [sku] CL/YIRSD-33](https://cobraductrods.com/wp-content/uploads/2023/06/duct-sonde-33khz-300x300.jpg)
Duct Sonde (33KHZ)
The 33kHz 24mm Duct Sonde is a battery powered transmitter which can be fitted to the end of a Ritelite cobra duct rodding system and used to trace the direction of small and congested ducts or conduit and identify blockage locations.
-
![General Purpose Sonde 8kHz [sku] CL/YIRS-8](https://cobraductrods.com/wp-content/uploads/2023/06/general-purpose-sonde-8khz-300x300.jpg)
General Purpose Sonde (8KHZ)
The 8kHz General Purpose Sonde is a transmitter used to trace the direction of pipes and locate blockages when 33kHZ signal is faint.
-
General Purpose Sonde (33KHZ)
The 33kHz 38mm General Purpose Sonde is a transmitter used for pipe traceability and blockage location up to 7M depth from any standard CAT and Genny system.
-
18mm Mini Sonde (33kHz)
A 18mm, slim, waterproof powerful 33kHz Sonde transmitter for smaller pipes and ducts for blockage location and pipe traceability.
-
![Metal Pipe Sonde [sku] CL/YIRS-512](https://cobraductrods.com/wp-content/uploads/2023/06/metal-pipe-sonde-300x300.jpg)
Metal Pipe Sonde
The Metal Pipe Sonde is a low frequency transmitter that can be fitted to Ritelite cobra rodding systems to enable rods to be traced inside metallic pipes and blockages located.