![Flexi Sonde Adaptor M5 to M10 [sku] MIDCOFLE/SA](https://cobraductrods.com/wp-content/uploads/2023/06/MIDCOFLE_SA-1.jpg "Flexi Sonde Adaptor M5 to M10 [sku] MIDCOFLE/SA")
Flexi Sonde Adaptor – M5 to M10
A flexi sonde adaptor that enables the user to attach a sonde with a M5 to M10 female thread on a cobra rodding system.
A flexible sonde adaptor suitable for all Ritelite 4.5mm and 6mm rodding systems (MIDCO). This adaptor enables the user to attach a Sonde with M10 female thread to your cobra rodding system and provides extra flexibility around pipe and duct corners. Used to detect blockages on underground pipe works.
You may also like…
-
![Duct Sonde 33kHz [sku] CL/YIRSD-33](https://cobraductrods.com/wp-content/uploads/2023/06/duct-sonde-33khz-300x300.jpg)
Duct Sonde (33KHZ)
The 33kHz 24mm Duct Sonde is a battery powered transmitter which can be fitted to the end of a Ritelite cobra duct rodding system and used to trace the direction of small and congested ducts or conduit and identify blockage locations.
-
![General Purpose Sonde 8kHz [sku] CL/YIRS-8](https://cobraductrods.com/wp-content/uploads/2023/06/general-purpose-sonde-8khz-300x300.jpg)
General Purpose Sonde (8KHZ)
The 8kHz General Purpose Sonde is a transmitter used to trace the direction of pipes and locate blockages when 33kHZ signal is faint.
-
General Purpose Sonde (33KHZ)
The 33kHz 38mm General Purpose Sonde is a transmitter used for pipe traceability and blockage location up to 7M depth from any standard CAT and Genny system.
-
![Metal Pipe Sonde [sku] CL/YIRS-512](https://cobraductrods.com/wp-content/uploads/2023/06/metal-pipe-sonde-300x300.jpg)
Metal Pipe Sonde
The Metal Pipe Sonde is a low frequency transmitter that can be fitted to Ritelite cobra rodding systems to enable rods to be traced inside metallic pipes and blockages located.
