![Sonde Adapto M12 to M10 [sku] MAXCOAD/911](https://cobraductrods.com/wp-content/uploads/2023/06/MAXCOAD_911-1.jpg)
Sonde Adaptor – M12 to M10
A sonde adaptor that enables the user to attach a sonde with a M12 to M10 female on a cobra rodding system.
Suitable for Ritelite Cobra rodding systems of diameter 9mm, 11mm or 14mm (MEDCO, MAXCO or MAXCOHC). This adaptor enables the user to attach a Sonde with M10 female thread to your cobra rodding system. Used to detect blockages on underground pipe works.
You may also like…
-
![Duct Sonde 33kHz [sku] CL/YIRSD-33](https://cobraductrods.com/wp-content/uploads/2023/06/duct-sonde-33khz-300x300.jpg)
Duct Sonde (33KHZ)
The 33kHz 24mm Duct Sonde is a battery powered transmitter which can be fitted to the end of a Ritelite cobra duct rodding system and used to trace the direction of small and congested ducts or conduit and identify blockage locations.
-
![General Purpose Sonde 8kHz [sku] CL/YIRS-8](https://cobraductrods.com/wp-content/uploads/2023/06/general-purpose-sonde-8khz-300x300.jpg)
General Purpose Sonde (8KHZ)
The 8kHz General Purpose Sonde is a transmitter used to trace the direction of pipes and locate blockages when 33kHZ signal is faint.
-
General Purpose Sonde (33KHZ)
The 33kHz 38mm General Purpose Sonde is a transmitter used for pipe traceability and blockage location up to 7M depth from any standard CAT and Genny system.
-
![Metal Pipe Sonde [sku] CL/YIRS-512](https://cobraductrods.com/wp-content/uploads/2023/06/metal-pipe-sonde-300x300.jpg)
Metal Pipe Sonde
The Metal Pipe Sonde is a low frequency transmitter that can be fitted to Ritelite cobra rodding systems to enable rods to be traced inside metallic pipes and blockages located.