General Purpose Sonde (8KHZ)
The 8kHz General Purpose Sonde is a transmitter used to trace the direction of pipes and locate blockages when 33kHZ signal is faint.
A 8kHz General Purpose Sonde is a small battery powered transmitter hermetically sealed in a robust torpedo shaped case which which can be screwed onto the end of a drain rod and fed into a pipe. The pipe direction can be then be traced using a CAT and Genny system. The location of a pipe blockage can be identified using this system with enormous cost saving potential.
Product | Product Code | Dimensions (mm) øxL |
General Purpose Sonde (33kHz) | CL/YIRS-8 | 38 x 102 |
Key Features:
- Green case to identify the 8kHz version
- 8kHz transmit signal allowing detection and tracing by a Precision Pipe and Cable Locator
- M10 stud
- 5-7 meter range (dependent on Locator)
- Simple to use
- Robust
- Waterproof
- Single AA battery operation
- Fully weatherproof design to IP65
- Adapters available for different Drain Rod Types
You may also like…
-
Sonde Adaptor – M5 to M10
A sonde adaptor that enables the user to attach a sonde with a M5 to M10 female thread on your cobra rodding system.
-
Sonde Adaptor – M12 to M10
A sonde adaptor that enables the user to attach a sonde with a M12 to M10 female on a cobra rodding system.
-
Flexi Sonde Adaptor – M5 to M10
A flexi sonde adaptor that enables the user to attach a sonde with a M5 to M10 female thread on a cobra rodding system.
-
Flexible Sonde Adaptor – M12 to M10
A flexi sonde adaptor that enables the user to attach a sonde with a M12 to M10 female thread on a cobra rodding system.