![Duct Sonde 33kHz [sku] CL/YIRSD-33](https://cdn-kekmh.nitrocdn.com/TgCxvmnSkVNcXoxJPbVdFYocHkCwbLPj/assets/images/optimized/rev-a276ec8/cobraductrods.com/wp-content/uploads/2023/06/duct-sonde-33khz.jpg)
Duct Sonde (33KHZ)
The 33kHz 24mm Duct Sonde is a battery powered transmitter which can be fitted to the end of a Ritelite cobra duct rodding system and used to trace the direction of small and congested ducts or conduit and identify blockage locations.
The 33kHz 24mm Duct Sonde is a small battery powered transmitter which can be screwed onto the end of a Ritelite Cobra duct rodding system with appropriate sonde adaptor to enable the direction of the duct or conduit to be traced by a standard C.A.T and Genny system. The location of a blockage can be identified using this system with enormous cost saving potential for users.
The small diameter of this Duct Sonde enables it to be fed easily into ducting without snagging when tracing electrical, telecommunication or cable conduits or ducts as often happens with standard diameter sondes.
| Product | Product Code | Dimensions (mm) øxL |
| Duct Sonde (33kHz) | CL/YIRSD-33 | 24 x 200 |
Key Features:
- 33kHz transmit signal allowing detection and tracing by a Cable Avoidance Tool
- Standard rod thread (" Whitworth 16 T.P.I.), female connector at one end
- Range of 3.5-4.5 meters dependent on Locator
- Construction ABS Plastic / Stainless Steel
- Weight 100g
- Signal 32,768Hz continuous
- Simple to use
- Robust
- Single AAA battery operation giving up to 20 hours intermittent use at 20oC
- Low battery signal
- Fully weatherproof design to IP65
- Compatible with most rods
- Resin sealed electronics
