Flexitrace Continuous Trace System
Sizes: 4.5mm & 6mm
Features: Continuous Traceability during deployment or retrieval with active signal whilst rodding is moving. Signal generation system continuously connected during use.
Sonde end accentuator integrated sonde end fitting allows enhanced signal and stronger end point detection.
Full trace mode / End detect Mode.
Compatibility: System tuned for optimum performance with industry standard 33Hz Cat and Genny Systems
Benefits: Accurate and Precision detection of full rod position including enhanced end point detection for accurate detection of end point in poor conditions.
Flexitrace Methods of Use
The Flexitrace continuous trace system gives a compact and labour saving solution when locating non-metallic ducts and drains. This provides the benefits of a sonde and a continuous trace system in one compact unit.
Sonde Mode
To locate the sonde within a non-metalic duct or drain, you need to energise the end coil, to activate the sonde. This is done by connecting both of the Flexitrace’s terminals to the generator. This will allow you to determine the end point and the depth of your duct or drain.
Line Mode
To locate the direction of the non-metalic duct or drain, attach a signal generator to one of the terminals of the Flexitrace and an earth stake (or other independant earth). The Flexitrace can be pushed the length of the duct or drain and then traced along it’s complete length with a Cable Avoidance Tool (CAT Receiver).
